Yonkers, NY · Commercial Kitchen Repair
True Repair in Yonkers
True Commercial Equipment Specialists
True Manufacturing is the backbone of American commercial refrigeration — reach-in coolers and freezers, sandwich and pizza prep tables, undercounter units, and glass-door merchandisers found in kitchens and bars across Yonkers. When a True cooler drifts warm and your inventory is on the clock, we diagnose the sealed system, controls and evaporator on site.
- STATUS
- Dispatch ready
- RESPONSE
- Same-day · 24/7
- RATING
- 4.9★ (612)
- WARRANTY
- 90-Day Parts & Labor Warranty
- COVERAGE
- Yonkers + Westchester
Serving Yonkers
True Commercial Equipment Specialists
The short answer
True Repair in Yonkers typically runs $250–$900 — the $95 diagnostic is waived when you approve the repair. Most jobs finish same-day with OEM-spec parts, backed by a 90-Day Parts & Labor Warranty, with 24/7 emergency dispatch. Call (914) 449-5646.
In a working Yonkers kitchen the enemy of a True cabinet is heat and grease, not weather. Condensers pack with airborne grease near the cook line, head pressure climbs, and the compressor runs hot until it fails — usually during a rush. A down reach-in or prep table means spoiled inventory and a health-code problem, so we treat warm-cabinet calls as revenue emergencies: fast dispatch, on-site sealed-system diagnosis, and a documented temperature check afterward so the unit is inspection-ready.
Why Choose Us
- Commercial-refrigeration specialists, not a residential handyman service
- Common True gaskets, fan motors, relays and controllers stocked on the truck
- Sealed-system and EPA-refrigerant work done to spec
- Same-day and 24/7 emergency dispatch for down coolers and freezers
- Temperature verified and documented for health-code compliance
- 90-day parts & labor warranty on every repair
Maintenance Tips
- Clean condenser coils every 30–90 days — grease and dust are the top cause of warm cabinets
- Check and replace door gaskets when they tear or stop sealing to a dollar-bill test
- Keep the evaporator and condensate drain clear so defrost water can't back up and freeze
- Don't block interior airflow by overpacking shelves or prep rails
- Verify holding temperatures daily and log them for health-inspection records
- Leave clearance around the condensing unit so it can reject heat
Quick facts
| Service | True Repair |
|---|---|
| Turnaround | Same-day in most cases |
| Diagnostic | $95 — waived on approved repair |
| Warranty | 90-Day Parts & Labor Warranty |
| Most common fault | Diagnosed on site |
| Serving | Yonkers, Mount Vernon, New Rochelle, White Plains & Westchester County |
What repairs cost
Straight pricing, no surprises.
These are typical all-in market ranges for parts and labor on commercial kitchen equipment across Yonkers and Westchester County. Your exact price is quoted on site after diagnosis — the $95 service call is waived when you approve the repair.
| Repair | Typical range |
|---|---|
| Diagnostic / service call | $95–$165 |
| Commercial reach-in / prep refrigeration repair | $250–$900 |
| Control board / electronics repair | $300–$950 |
Ranges are estimates for reference, not a quote. OEM-spec parts · 90-Day Parts & Labor Warranty.
How a call goes
One commercial specialist. Fast dispatch. Verified fix.
- 01
Call & dispatch
Reach a real person at (914) 449-5646 — most Yonkers jobs get a same-day slot, and emergencies get 24/7 priority dispatch.
- 02
Diagnose the fault
We test the actual failing part and system — sealed system, gas train, harvest cycle — not guess-and-swap.
- 03
Fix with OEM-spec parts
Common commercial parts ride on the truck, so most repairs finish in a single visit.
- 04
Verify & warranty
We verify temperatures and safety, back every repair with a 90-Day Parts & Labor Warranty, and leave you inspection-ready.
Answers
Frequently asked questions
My True prep table is holding food above 41°F on the rail — what's wrong?
A warm rail almost always traces to airflow or a dirty condenser, not the food pans. Common causes are a clogged condenser choking heat rejection, an iced evaporator from a failed defrost or bad door gasket, an overloaded rail blocking airflow, or ambient heat from a nearby fryer or oven. We verify the cabinet temperature, check the sealed system, and confirm the rail holds below 41°F so you stay inside health-code limits.
How fast can you get a down True cooler back in service?
Most Yonkers refrigeration calls get a same-day slot, and true emergencies — a cooler full of inventory drifting warm — get priority dispatch. We carry common True compressor start components, fan motors, gaskets and controllers, so a large share of repairs finish on the first visit before product is lost.
Is it worth repairing an older True reach-in or should we replace it?
True cabinets are heavily built and usually worth repairing — a new condensing unit, evaporator fan motor, or gasket set is a fraction of replacement cost. We give you an honest read: if the sealed system is failing and the cabinet is 15+ years old, we tell you; otherwise a targeted repair buys years of reliable service.
Why is my True freezer icing up and losing capacity?
Excess ice on the evaporator points to a defrost fault (failed heater, timer, or termination thermostat), a torn door gasket letting warm humid air in, or a stuck door from a worn hinge. We find the specific cause, clear the ice, and restore the defrost cycle so the coil stays clear and the box holds 0°F.
Do you clean condensers and offer preventive refrigeration maintenance?
Yes. A dirty condenser is the number-one cause of warm cabinets and premature compressor failure in a greasy kitchen environment. We offer scheduled coil cleaning, gasket inspection, drain clearing and temperature logging so your True equipment stays inspection-ready and out of the emergency queue.
Verified reviews
Rated 4.9★ by Yonkers operators
612 verified reviews
“Outstanding True repair service! The technician was very knowledgeable about True appliances and fixed our reach-in coolers quickly. Highly recommended!”
“Both our True reach-in and the sandwich prep rail were running warm and I was worried about the health inspector. Turned out the condensers were packed with grease. They cleaned everything, replaced two gaskets, and now both hold temperature perfectly. They set us up on a maintenance schedule so it won't happen again.”
“Our walk-in cooler started climbing on a Saturday night with the whole weekend's prep inside. I called at 9pm and a tech was here within the hour, found a failed condenser fan and a low charge, and had the box pulling down before we lost product. That single call saved us thousands. This is who we call now, period.”
“Our Vulcan fryer wouldn't heat right before a Friday rush — high-limit had tripped and kept tripping. They found a failed thermostat that was overheating the oil, replaced it, and we were frying again within two hours. They actually fixed the cause instead of just resetting it like the last company did.”
Across Yonkers, Mount Vernon, New Rochelle, White Plains and the wider Westchester County commercial corridors, Yonkers Commercial Appliance Repair is the team restaurants, bars and commercial kitchens call when a true repair needs a true commercial specialist rather than a residential appliance tech. We diagnose the actual fault — not guess-and-swap — carry OEM-spec parts on the truck for most Yonkers visits, and back every repair with a 90-Day Parts & Labor Warranty. In a commercial kitchen, downtime is lost revenue and lost inventory, so we dispatch fast and verify temperatures and safety before we leave. Call (914) 449-5646 for same-day and 24/7 emergency service.
4.9★ · Yonkers & Westchester County · 24/7
Need True Repair in Yonkers?
Call (914) 449-5646 for same-day & 24/7 emergency service in Yonkers.